Docker Networking 101
Learn about Docker network types, how containers communicate, common networking operations, and more.
What is Docker Networking
For Docker containers to communicate with each other and the outside world via the host machine, there has to be a layer of networking involved. Docker supports different types of networks, each fit for certain use cases.
For example, building an application which runs on a single Docker container will have a different network setup as compared to a web application with a cluster with database, application and load balancers which span multiple containers that need to communicate with each other. Additionally, clients from the outside world will need to access the web application container.
Docker Default Networking (docker0)
When Docker is installed, a default bridge network named
docker0 is created. Each new Docker container is automatically attached to this network, unless a custom network is specified.
docker0 , two other networks get created automatically by Docker:
host (no isolation between host and containers on this network, to the outside world they are on the same network) and
none (attached containers run on container-specific network stack).
Docker Network Types
Docker comes with network drivers geared towards different use cases. The most common network types being: bridge, overlay, and macvlan.
Bridge networking is the most common network type. It is limited to containers within a single host running the Docker engine. Bridge networks are easy to create, manage and troubleshoot.
For the containers on bridge network to communicate or be reachable from the outside world, port mapping needs to be configured. As an example, consider you can have a Docker container running a web service on port 80 . Because this container is attached to the bridge network on a private subnet, a port on the host system like 8000 needs to be mapped to port 80 on the container for outside traffic to reach the web service.
To create a bridge network named
my-bridge-net , pass the argument
bridge to the
-d (driver) parameter as shown below:
An overlay network uses software virtualization to create additional layers of network abstraction running on top of a physical network. In Docker, an overlay network driver is used for multi-host network communication. This driver utilizes Virtual Extensible LAN (VXLAN) technology which provide portability between cloud, on-premise and virtual environments. VXLAN solves common portability limitations by extending layer 2 subnets across layer 3 network boundaries, hence containers can run on foreign IP subnets.
To create an overlay network named
my-overlay-net, you’ll also need the
--subnet parameter to specify the network block that Docker will use to assign IP addresses to the containers:
The macvlan driver is used to connect Docker containers directly to the host network interfaces through layer 2 segmentation. No use of port mapping or network address translation (NAT) is needed and containers can be assigned a public IP address which is accessible from the outside world. Latency in macvlan networks is low since packets are routed directly from Docker host network interface controller (NIC) to the containers.
Note that macvlan has to be configured per host, and has support for physical NIC, sub-interface, network bonded interfaces and even teamed interfaces. Traffic is explicitly filtered by the host kernel modules for isolation and security. To create a macvlan network named
macvlan-net, you’ll need to provide a
--gateway parameter to specify the IP address of the gateway for the subnet, and a
-o parameter to set driver specific options. In this example, the
parent interface is set to
eth0 interface on the host:
How Containers Communicate with Each Other
Different networks provide different communication patterns (for example by IP address only, or by container name) between containers depending on network type and whether it’s a Docker default or a user-defined network.
Container discovery on docker0 network (DNS resolution)
Docker will assign a name and hostname to each container created on the default
docker0 network, unless a different name/hostname is specified by the user. Docker then keeps a mapping of each name/hostname against the container’s IP address. This mapping allows pinging each container by name as opposed to IP address.
Furthermore, consider the following example which starts a Docker container with a custom name, hostname and DNS server:
In this example, processes running inside
test-container, when confronted with a hostname not in
/etc/hosts, will connect to address 220.127.116.11 on port 53 expecting a DNS service.
Directly linking containers
It is possible to directly link one container to another using the
--link option when starting a container. This allow containers to discover each other and securely transfer information about one container to another container. However, Docker has deprecated this feature and recommends creating user-defined networks instead.
As an example, imagine you have a
mydb container running a database service. We can then create an application container named
myweb and directly link it to
How Containers Communicate with the Outside World
There are different ways in which Docker containers can communicate with the outside world, as detailed below.
Exposing Ports and Forwarding Traffic
In most cases, Docker networks use subnets without access from the outside world. To allow requests from the Internet to reach the container, you’ll need to map container ports to ports on the container’s host. For example, a request to
hostname:8000 will be forwarded to whatever service is running inside the container on port 80, if a mapping from host port 8000 to container port 80 to was previously defined.
Containers Connected to Multiple Networks
Fine-grained network policies for connectivity and isolation can be achieved by joining containers to multiple networks. By default each container will be attached to a single network. More networks can be attached to a container by creating it first with
docker create (instead of
docker run) and then running the command
docker network connect. For example:
The container is now connected to two distinct networks simultaneously.
How IPv6 Works on Docker
By default, Docker configures the container networks for IPv4 only. To enable IPv4/IPv6 dual stack the
--ipv6 flag needs to be applied when starting the Docker daemon. Then the
docker0 bridge will get an IPv6 link-local address
fe80::1. To assign globally routable IPv6 addresses to your containers, use the flag
--fixed-cidr-v6 followed by ipv6 address.
Some common operations with Docker networking include:
- Inspect a network: To see a specific network’s configuration details like subnet information, network name, IPAM driver, network ID, network driver, or connected containers, use the
docker network inspectcommand.
- List all networks: Run
docker network lsto display all networks (along with their type and scope) present on the current host.
- Create a new network: To create a new network, use the
docker network createcommand and specify if it's of type bridge (default), overlay or macvlan.
- Run or connect a container to a specific network: Note first of all, the network must exist already on the host. Either specify the network at container creation/startup time (
docker run) with the
--netoption; or attach an existing container by using the
docker network connectcommand. For example:
- Disconnect a container from a network: The container must be running to disconnect it from the network using the
docker network disconnectcommand.
- Remove an existing network: A network can only be removed using the command
docker network rmif there are no containers attached to it. When a network is removed, the associated bridge will be removed as well.
Docker Networking with Multiple Hosts
When working with multi-host, there is a need to use higher-level Docker orchestration tools to ease management of networking between a cluster of machines. Popular orchestration tools today include Docker Swarm, Kubernetes, and Apache Mesos.
Docker Swarm is a Docker Inc. native tool used to orchestrate Docker containers. It enables you to manage a cluster of hosts as a single resource pool.
Docker Swarm makes use of overlay networks for inter-host communication. The swarm manager service is responsible for automatically assigning IP addresses to the containers.
For service discovery, each service in the swarm gets assigned a unique DNS name. Additionally, Docker Swarm has an embedded DNS server. You can query every container running in the swarm through this embedded DNS server.
Kubernetes Guide is a system used for automating deployment, scaling, and management of containerized applications, either on a single host or across a cluster of hosts.
Kubernetes approaches networking in a different way as compared to Docker, using native concepts like services and pods. Each pod has an IP address and no linking of pods is required, neither do you need to explicitly map container ports to host ports. There are DNS-based service discovery plugins which can be used for service discovery.
Apache Mesos is an open-source project used to manage a cluster of containers, providing efficient resource sharing and isolation across distributed applications.
Mesos uses IP address management (IPAM) server and client to manage containers networking. The role of the IPAM server is to assign IP addresses on demand while the IPAM client acts as a bridge between a network isolator module and the IPAM server. A network isolator module is a lightweight module that’s loaded into the Mesos agent. It looks at scheduler task requirements and uses IPAM and network isolator services to provide IP addresses to the containers.
Mesos-dns is a DNS-based service discovery for Mesos. It allows applications and services running on Mesos to find each other through the DNS service.
Creating a New Network Driver Plugin
Docker plugins are out-of-process extensions which add capabilities to the Docker Engine. The Docker engine network plugins API allows for support of a wide range of networking technologies to be realized. Once a networking plugin has been developed and installed, they behave just like the built-in bridge, overlay and macvlan network drivers.
Docker offers a mature networking model. There are three common Docker network types - bridge networks, used within a single host, overlay networks, for multi-host communication, and macvlan networks which are used to connect Docker containers directly to host network interfaces.
In this page we explained how Docker containers discover and communicate with each other and how they communicate with the outside world. We showed how to perform common operations such as inspecting a network, creating a new network and disconnecting a container from a network. Finally, we briefly reviewed how docker networking works in the context of common orchestration platforms - Docker Swarm, Kubernetes Guide and Apache Mesos.
Top Docker Networking Tutorials from the Community
Tutorial by: Edureka
Can help you learn: Docker Networking
- Networking in Docker
- Goals of Docker Networking
- Container Network Model
- Network Drivers
Tutorial by: Docker
Can help you learn: Launch containers on default network, create user-defined bridge networks and adding containers to a network.
Tutorial by: Play-with-docker (PWD)
Can help you learn: How to work with different Docker networks.
Tutorial by: Docker
Can help you learn: Challenges of networking Docker containers, how networking is implemented by Docker, different network drivers, Linux networking and physical network requirements when creating Docker networks.
- The container networking model
- Docker native network drivers
- Docker remote network drivers
- Linux network fundamentals
- Physical network design requirements
Tutorial by: Katacoda
Can help you learn: How to allow containers on two different hosts to communicate
- Configure key/value store
- Configure Docker daemon on host 1
- Configure Docker daemon on host 2
- Create multi-host network
- Start service on host 1
- Access service on host 2
Top Docker Networking Videos
- No labels